uv printers are large industrial grade equipment that is indispensable in all walks of life. uv flatbed printers have been used for a long time, and some problems will occur more or less. For example, flying ink appears during the printing process; after the uv printer is turned on, the car runs around on the left and the back. Below, Xiaobian mainly explains the solution to the chaos on both sides of the car.

1. Check if the motherboard is damaged. If it is damaged after inspection, please contact the technician to replace the motherboard.

2. During the use of the uv printer, the collision of the car due to operational errors can also cause this to happen.

3. The car board is faulty or the car cable is not plugged in.

4. Check the raster decoder. In the case of a damaged raster decoder, the cart may move the cart left and right because it cannot accurately read the print position.

The uv printer head is positioned by itself, so don't use your hand to move the cart, otherwise it will cause damage to the printer head. When the machine is turned off, wait until the car returns to the initial position and then turn it off to avoid wasting ink or plugging.