AR glass (Anti-reflective glass) is also called anti-glare glass, anti-reflective glass, etc.

principle:

The surface of high-quality glass is specially processed with a chemical liquid such as hydrofluoric acid, so that the reflective surface of the original glass becomes a matte non-reflective surface. Compared with ordinary glass, it has a lower reflectance. Low-reflection glass can reduce the reflectance of light from 8% to less than 1%. The objects will be clear and transparent when viewed through the glass, allowing viewers to experience a better experience. Sensory vision.

application:

1. Brand stores: luxury goods, cosmetics stores, car showrooms;

2. Museums: art galleries, art galleries, gymnasiums;

3. Picture frame photo frame;

4. Electronic products: desktop computers, tablet computers, TV screens, advanced electronic watches, etc.;

5. Others: bus drivers surround anti-reflective glass, billboards, TV broadcasting studios, railways, airports and industrial control centers.

advantage:

1. The highest peak of visible light transmittance is 99%. The average transmittance of visible light exceeds 95%, which greatly improves the original brightness of LCD and PDP and reduces energy consumption.

2. The average reflectivity is less than 4%, and the lowest value is less than 0.5%, effectively reducing the shortcomings of whitening of the picture due to strong light behind, and enjoying clearer image quality.

3. The color is more beautiful and the contrast is stronger, so that the image color contrast is stronger and the scene is clearer.

4. Anti-ultraviolet rays, which can effectively protect the eyes. The transmittance of the ultraviolet spectrum area is greatly reduced, and it can effectively prevent the damage of ultraviolet rays to the eyes.

5. High temperature resistant AR glass temperature resistant> 500 degrees (generally acrylic can only be resistant to temperature 80 degrees).

6. Good scratch resistance and abrasion resistance. The hardness of the AR glass film is equivalent to that of glass, greater than 7H (generally the hardness of PC board is about 2H to 3H).

7. It is resistant to cleaning with various cleaning agents, acid-resistant and anti-cleaning agents, and the film layer is not damaged.

8. Strong impact resistance The impact performance of 3mm thick glass is equivalent to 6mm acrylic.

9. Maintain the viewing angle. Generally, the viewing angle of acrylic will become smaller after installation; and the viewing angle will not become smaller after AR glass is installed.

10. Appearance: The surface flatness of AR glass is far better than that of coated acrylic, and the larger the size, the more obvious the difference.

11. The cold and hot deformation of AR glass can be almost omitted, and it is suitable for all kinds of environments; at the same time, AR glass has a sense of glaze and a more beautiful appearance.